Reset All; Repair; Visible / Not Visible - Busch-Jaeger SD/U12.55.11-825 Manual

7.13.5

Reset all

This function resets all parameter settings to the basic settings. All created pages and the group
addresses will be deleted.
7.13.6

Repair

Notice
This function is not available when the ETS is executed on a virtual machine.
With this function you can initiate a consistency test of the data with the cleanup of errors when
during the opening of the DCA the displayed data do not match those in the previously
configured devices.
7.13.7

Visible / Not visible

Notice
This function is not available when the ETS is executed on a virtual machine.
With this function, notice fields can be faded in or out.
– Visible, the notice fields are faded in.
– Not visible, the notice fields are faded out.
Product manual 2CKA001473B5472
Commissioning of the KNX function via DCA
│73