Busch-Jaeger SD/U12.55.11-825 Manual page 143

Value 2
■
Options:
The parameter is used to select the percentage value for the value 21.
Value 1
■
Options:
The parameter is used to select the byte value for value 1.
Value 2
■
Options:
The parameter is used to select the byte value for value 2.
Value 1
■
Options:
This parameter is used to select the scene for value 1.
Product manual 2CKA001473B5472
Control elements and application parameter
Setting option from 0 - 100%
Notice
– The parameter is only available if the "Object type" parameter is set on
"1-byte value [0..100]".
– The parameter is only available if the "Response to pressing" or
"Response to releasing" parameter is set on "Value 2" or on
"Alternating value 1/value 2".
Setting option from 0 - 255
Notice
– The parameter is only available if the "Object type" parameter is set on
"1-byte value [0..255]".
– The parameter is only available if the "Response to pressing" or
"Response to releasing" parameter is set on "Value 1" or on
"Alternating value 1/value 2".
Setting option from 0 - 255
Notice
– The parameter is only available if the "Object type" parameter is set on
"1-byte value [0..255]".
– The parameter is only available if the "Response to pressing" or
"Response to releasing" parameter is set on "Value 2" or on
"Alternating value 1/value 2".
Setting option from 1 - 64
Notice
– The parameter is only available if the "Object type" parameter is set on
"Scene number [1..64]".
– The parameter is only available if the "Response to pressing" or
"Response to releasing" parameter is set on "Value 1" or on
"Alternating value 1/value 2".
Application "Inputs"
│143