Product Overview - Busch-Jaeger SD/U12.55.11-825 Manual

4

Product Overview

Fig. 1: Product overview
The displays are multifunctional room control displays for visualizing and operating building
functions in Busch-Installationsbus
The devices are available in frame-bound form and single displays (2.4" and 4.0").
■
The displays have a capacitive touchdisplay with a resolution of 240 x 240 points.
■
The control is connected with a haptic feedback (vibration) and signals specific operating
■
statuses to the user.
Up to 4 functions per page, up to a total of 12 functions on several pages.
■
The 2.4" displays can be combined with existing design lines (e.g. solo, future, axcent, etc.).
■
The displays are compatible with both bus systems of Busch-Installationsbus
free@home Bus. The signals are transmitted and the power for the device is supplied via the
Busch-Installationsbus
The device can also be used for the display of fault and alarm messages.
KNX configuration
The displays are configured with commissioning tool "ETS" and an ETS app.The commissioning
tool is integrated in the ETS and makes possible the direct access to group addresses and flags
of communication objects. The control elements consist of freely programmable touch surfaces.
The ETS app must be loaded from the KNX online shop and installed in the ETS.
The ETS app for the 2.4" display is called BJE DCA LC-Display.
■
The ETS app for the 4" display is called BJE Touch DCA.
■
Product manual 2CKA001473B5472
® KNX and Busch-free@home
®
KNX or the free@home Bus. An additional power supply is required.
Product Overview
® systems.
®
KNX and
│20