Application Layer; Transmission Mode For Application Data; Common Address Of Asdu; Selection Of Standard Information Numbers In Monitor Direction - ABB Relion REM615 Manual

Section 3
Interoperability profile for 615 series IEC 60870-5-103
3.3
3.3.1
3.3.2
3.3.3
3.3.3.1
3.3.3.2
22

Application layer

Transmission mode for application data

Mode 1 (least significant octet first), as defined in 4.10 of IEC 60870-5-4, is used
exclusively in this companion standard.

COMMON ADDRESS of ASDU

⊠ One COMMON ADDRESS OF ASDU (identical with station address)
⃞ More than one COMMON ADDRESS OF ASDU
Selection of standard information numbers in monitor
direction

System functions in monitor directions

INF Semantics
⊠ <0> End of general interrogation
⊠ <0> Time synchronization
⊠ <2> Reset FCB
⊠ <3> Reset CU
⊠ <4> Start/restart
⊠ <5> Power on

Status indications in monitor direction

INF Semantics
⊠ <16> Auto-recloser active 1
⃞ <17> Teleprotection active
⃞ <18> Protection active
⃞ <19> LED reset
⃞ <20> Monitor direction blocked
⊠ <21> Test mode
⃞ <22> Local parameter setting
⊠ <23> Characteristic 1
⊠ <24> Characteristic 2
⊠ <25> Characteristic 3
⊠ <26> Characteristic 4
Table continues on next page
1MRS756882 B
REM615
Point List Manual