Operation When Using Uniflow Online; Installing The Ic Card Reader - Canon imagePRESS Lite C270 Installation Manual

Table of Contents

Advertisement

■ Checking the Network Setting of the Host Machine
Check if the IP address specified in the Host Machine is correct.
1. Select the following: [Settings/Registration] > [Preferences] > [Network] > [TCP/IP Settings] > [IPv4 settings] > [IP
address setting]; and write down the address in the IP address field.
2. Select the following: [Settings/Registration] > [Preferences] > [Network] > [TCP/IP Settings] > [IPv4 settings] > [Ping
Command]; and enter the IP address.
• The IP address specified in the Host Machine is correct if the message say "Response from the host".
• If "No response from the host." is displayed, check if the IP address information set for the system administrator is
correct.
NOTE:
When setting the address by manually input, set the Subnet Mask by following the instruction of the administrator.
■ Checking Network Function on the Main Controller
Perform checking by the loopback address.
1. Select the following: [Settings/Registration] > [Preferences] > [Network] > [TCP/IP Settings] > [IPv4 settings] > [Ping
Command]; and enter the IP address, "127.0.0.1" with the numeric keypad and enter Execute key.
• The network function of the Main Controller is working properly if the message say "Response from the host".
• If the message say "No response from the host", the network function of the Main Controller is faulty.
2. Replace with a Main Controller that works properly, and then check connection.

Operation when using uniFLOW Online

When using uniFLOW Online*, follow the setup procedures on the uniFLOW* Online First Steps Guide (http://www.nt-ware.com/
uFO_FS).
* China version of "uniFLOW" is called "mdsFLOW".

Installing the IC Card Reader

NOTE:
• When installing the IC Card Reader, the IC Card Reader (sales company's option) is required.
• Use the shorter cable of the IC Card Reader.
• When installing the IC Card Reader and Numeric Keypad at the same time, install the Numeric Keypad first.
1.
If the main power switch of the host machine is ON, turn it OFF.
142
2. Host Machine

Advertisement

Table of Contents
loading

This manual is also suitable for:

Imagepress lite c265

Table of Contents