Canon imagePRESS Lite C270 Installation Manual page 366

3. Relocate the rear edge guide plate at the specified paper size.
CAUTION:
Paper size is marked on both top and bottom of the compartment. Check that the marked paper size is the specified paper
size when relocating the rear edge guide plate.
4. Set sheets of paper in the compartment and close it.
5. Set the paper size on the service mode.
(Lv.1) COPIER > OPTION > ACC > DK-P
• 0: A4
• 1: B5
• 2: LTR
1x 1x
357
5. Paper Feed Options