Table of Contents
Advertisement
15.
After seeing "Perform Apply Setting Changes from Settings/Registration." displayed on the host machine's Touch
Panel, select [Apply Set. Changes] > [Yes].
NOTE:
• The host machine automatically restarts. It may take approx. 10 minutes before the message appears.
• The imagePRESS is automatically restarted only at the first time when it is connected.
It takes about approx. 5 minutes until it is ready for use. Do not press the buttons on the imagePRESS until it is ready for use.
16.
Check that the value of the following service mode is "485".
COPIER > OPTION > INT-FACE > CNT-TYPE
17.
Exit from Service Mode.
Settings After Installation
■ Settings After Installation
1. Select [Fiery] from the main menu on the host machine's LCD.
NOTE:
It may take a while for the Fiery icon shown in the figure below to appear.
311
4. Host Machine Options
Advertisement
Table of Contents
