Installing The Scanner - Canon imagePRESS Lite C270 Installation Manual

■ Buffer Path Unit (Only Models with the Buffer Path Unit Included as Standard)

Installing the Scanner

NOTE:
• Because the Scanner Fixation Member will be needed when moving the machine, be sure to keep it in a safe place.
• When moving the machine, be sure to execute following service mode (Lv.2), remove the Reader Left Upper, and
then install the Scanner Fixation Member. (For details, refer to "When Relocating the Machine".)
COPIER > FUNCTION > MISC-R > RD-SHPOS
[1] Buffer Path Unit X 1
[3] Buffer Front Cover
X 1
[5] Cover Support Plate
(Front) X 1
[7] Connecting Harness
Cover X 1
[9] Screw
(RS Tightening; M4x8)
X 9
24
[2] Buffer Left Lower
Cover X 1
[4] Delivery Outlet Upper
X 1
[6] Cover Support Plate
(Rear) X 1
[8] Hinge Shaft X 2
[10] Screw
(P Tightening; M4x10)
X 1
[11] Wire Saddle X 1
2. Host Machine