Table of Contents
Advertisement
■ Basic Setting
NOTE:
• When "System Manager Information Settings" is set, be sure to follow the direction of user administrator in order to log in as
an administrator.
• This setting can also be set from the Setup Guide ([Settings/Registration] > [Management Settings] > [License/Other] > [Start
Setup Guide]).
In this section, make only minimum settings required for FAX communication.
1. Set the user telephone number.
[Settings/Registration] > [Function Settings] > [Send] > [Fax Settings] > [Set Line] > [Line 1] > [Register Unit Telephone
Number] > Enter the fax number > [OK]
2. Set Type of telephone line.
[Settings/Registration] > [Function Settings] > [Send] > [Fax Settings] > [Set Line] > [Line 1] > [Select Line Type] > Select
the line type to connect > [OK]
3. Turn OFF/ON the main power switch after setting the user telephone numbers and the type of telephone line.
■ FAX Communication Test
Perform communication test to check if FAX function works correctly.
1. Switch the control panel display to Send/Fax display.
2. Send the test document from this machine to another machine that can handle the communication test to check
that this machine can send the data correctly.
3. Send the test document from the target to this machine to check if the machine can receive the document properly.
271
4. Host Machine Options
Advertisement
Table of Contents
