1. Using the Wrench, loosen the Upper Nut on the caster.
NOTE:
• Turn the Upper Nut clockwise to loosen.
• If it is difficult to loosen the Upper Nut, loosen the Upper Nut while fixing the Lower Nut by using the Wrench of the other
options.
2. Using the Wrench, turn the Lower Nut on the caster to adjust the height.
NOTE:
• To increase the height of this Equipment, turn the Lower Nut in the direction of arrow [A].
• To decrease the height of this Equipment, turn the Lower Nut in the direction of arrow [B].
[A]
[B]
[B]
[A]
442
5. Paper Feed Options