Canon imagePRESS Lite C270 Installation Manual page 639

3. Holding the Jam Removal Lever, raise the Transfer Guide. (Document Insertion/Folding Unit only)
4. Loosen the nut [1] on the Caster of the front side (upstream equipment side). Then turn the nut [2] to adjust the
height.
NOTE:
• Turn the nut [1] clockwise (direction of arrow [B]) to loosen.
• Turn the nut [2] counterclockwise (direction of arrow [A]) to reduce the height of the equipment and clockwise (direction of
arrow [B]) to increase the height of the equipment.
[2] [1]
[A]
[B]
630
6. Paper Output Options