Making Adjustments - Canon imagePRESS Lite C270 Installation Manual

6. Paper Output Options
■ Affixing the Puncher Label. (When Installing Puncher Unit.)
1.

Making Adjustments

The difference in height between the Finisher and the Host Machine and the tilt of the Finisher and the host machine need to be
adjusted depending on the installation site floor condition. If the height or tilt is not adjusted properly, problems can occur (for
example, a paper jam can occur frequently at the paper supply section of the Finisher). Check the height and tilt and adjust it as
required. Be sure to adjust as necessary.
782