Table of Contents
Advertisement
6. Fix to the upstream connection machine.
■ Checking the Difference in Tilt
Check the relational tilting amount of the Finisher and the upstream connection machine. Make sure that the gap between the
right side of the Finisher and the left side of the upstream connection machine is within the standard shown in the figure.
In the case the gaps are within the specification, this adjustment is not required.
● Connecting to the Host Machine
1x
5.0 -/+ 1.5 mm
5.0 -/+ 1.5 mm
788
6. Paper Output Options
Advertisement
Table of Contents
