● Connecting to Document Insertion Unit
1. Fix the Shunt Cable to the rear bottom of this equipment and Document Insertion Unit.
• 2 Screws (Binding ; M4x10)
NOTE:
When the shunt cable is fixed, do not overlap it on the bosses of the mount plate.
● Connecting to Multi Function Professional Puncher
1. Fix the shunt cable to the rear bottom of this equipment and Multi Function Professional Puncher.
• 2 Screws (Binding, M4 x 10)
NOTE:
When the shunt cable is fixed, do not overlap it on the bosses of the mount plate.
Binding ; M4x10
2x
Binding ; M4x10
2x
657
6. Paper Output Options