2. Host Machine
9. Hold the front right side face and the left side face of the Developing Assembly (for black), align the rail part of the
Developing Assembly (for black) with the groove of the host machine, and then push the assembly in horizontally.
CAUTION:
When sliding the Developing Assembly (for black) inside, do not touch the Developing Sleeve.
Developing Sleeve
Rail Slot
Rail
NOTE:
While holding the Developing Assembly (for black) with both hands, insert about 2/3 of it, and then push the handle of the Black
Developing Assembly with your finger as shown in the figure to insert all the way until it stops.
61