Table of Contents
Advertisement
8. Remove the Conveyer Base. (The removed parts will not be used.)
• 5 Screws
■ Connecting to the Upstream Booklet Trimmer
CAUTION:
Check that the power switch on the host machine is turned off, and its power plug is unplugged from the outlet.
1. Install the Two-Knife Booklet Trimmer [2] by inserting the positioning pin [1] on the trimmer to the middle slot [3]
on the upstream Booklet Trimmer.
5x
[3]
[2]
[1]
903
6. Paper Output Options
Advertisement
Table of Contents
