Canon imagePRESS Lite C270 Installation Manual page 640

5. Loosen the nut [1] on the Caster of the rear side (upstream equipment side). Then turn the nut [2] to adjust the
height.
NOTE:
• Turn the nut [1] clockwise (direction of arrow [B]) to loosen.
• Turn the nut [2] counterclockwise (direction of arrow [A]) to reduce the height of the equipment and clockwise (direction of
arrow [B]) to increase the height of the equipment.
6. After adjustment, tighten the front and rear nuts [1] of the Caster (upstream equipment side).
[1]
[2]
[B] [A]
631
6. Paper Output Options