Table of Contents
Advertisement
CAUTION:
When installing the inner trimmer, pay full attention to the following notification:
When drawing out the saddle unit with releasing the rail stoppers as the saddle unit is required to be fully drawn out at
installation, the cable guide may tense, which interferes housing the saddle unit. In such the case, the cable guide may
break at its joint, if the saddle unit is forcibly slid in the finisher.
15. Install the inner cover using three screws.
16. Install the jam dial (lower) using one screw.Then, install the jam dial (upper).
17. Attach the front door of the finisher.
18. Secure the front door of the finisher with one resin ring.
853
6. Paper Output Options
Advertisement
Table of Contents
