Table of Contents
Advertisement
5. Paper Feed Options
4. Fasten the 2 screws loosened at procedure 2.
• 2 Screws
2x
Fasten
5. Move the front cover fitting to the amount of the latch plate adjustment. Refer to the next item "Front Cover
Positioning Adjustment" for detail.
6. Close the compartment and connect with the host machine.
7. Print sheet of paper from the Paper Deck. Check that L1 is 2.5+/-1.5mm. Re-adjust L1 in case that it is out of standard.
361
Advertisement
Table of Contents
