Canon imagePRESS Lite C270 Installation Manual page 763

3. Write down the setting of DIP SW while the Switch Cover is removed.
4. Set DIP switch SW 382 on the Switch PCB as shown in the figure (1, 2, 6, 7 : ON), and press ENTER button (SW 385),
resulting in "0" blinks on the LED.
5. Restore the DIP SW to the state of Step 3.
■ Side Registration/Skew Adjustment
● Checking Adjustment Value
1. Write down the setting of DIP Switch (SW382) whose state is before being adjusted.
2. Set DIP switch SW 382 on the Switch PCB as shown in the figure (1, 4, 6, 8 : ON), and press ENTER button (SW 385),
resulting in "0" blinks on the LED.
3. Place a sheet of A4 or LTR paper and set in ADF or the copyboard mode, and set "3" for copy count to execute
printing.
SW382
SW381
SW383 SW384 SW385
(-) (+) ENTER
SW382
SW381
SW383 SW384 SW385
(-) (+) ENTER
754
6. Paper Output Options