Table of Contents
Advertisement
■ Adjusting the Height
1. Separate the finisher from the upstream equipment.
2. Open the Finisher Front Cover and remove the wrench.
• 1 Screw
3. In the case of the Booklet Finisher, remove the Saddle Inner Cover (Lower).
• 4 Screws (3 RS Tightenings, 1 W Sems)
• 1 Knob
1x
Spanner
Screw
4x
713
6. Paper Output Options
Knob
Saddle Inner Cover (Lower)
Advertisement
Table of Contents
