4. According to the scale with which the position was checked in step 3, adjust the position of the Cassette Lock Unit.
• 1 scale mark : 1.0 mm
CAUTION:
Be careful not to move a cassette too much; otherwise, it may not be able to be installed in the host machine.
NOTE:
• When L4 is too large :
Moving the Hook Support Plate toward the rear makes L4 smaller.
• When L4 is too small :
Moving the Hook Support Plate toward the front makes L4 larger.
(Ly is fixed.)
5. Tighten the loosened 2 screws.
6. Return the cassette to the original position.
Ly
L4
Ly
L4
99
2. Host Machine