Table of Contents
Advertisement
■ Connecting the Shunt Cable
● Connecting to the Host Machine
1. Remove the screw at the rear lower position of the Buffer Pass Unit.
2. Fix the Shunt Cable at the rear bottom of the Buffer Pass Unit and this equipment.
• 1 Screw (Binding; M4x10)
• 1 Screw (RS Tightening ; M4x10) (removed in Step1.)
NOTE:
When the shunt cable is fixed, do not overlap it on the bosses of the mount plate.
1x
Binding ; M4x10
2x
656
6. Paper Output Options
Advertisement
Table of Contents
