Table of Contents
Advertisement
■ Connecting the Power Cord
1. Insert the Power Cord into this equipment. Connect the plug end of the Power Cord into an external power outlet.
NOTE:
Illustrations used in this procedure are those of imagePRESS C10000VP series.
CAUTION:
Make sure that the Intermadiate power cable connects to the socket firmly. If connecting precariously, it may result in a
smoke or fire.
■ Connecting the Shunt Cable
1. Remove the screw at the rear lower position of the Buffer Pass Unit.
1x
594
6. Paper Output Options
Advertisement
Table of Contents
