Table of Contents
Advertisement
2. Fix the 2 Clamp Plates and the Positioning Pin to the host machine. At this time, fix the supplied Ground Plate along
with the rear Clamp Plate in the rear side.
• 6 Screws (RS Tightening ; M4x8)
● Connecting to Document Insertion Unit
1. Fix the 2 Latch Catches and the Positioning Pin to the Document Insertion Unit. At this time, fix the Ground Plate
along with the Latch Catch in the rear side.
• 6 Screws (RS Tightening; M4x8)
RS Tightening ; M4x8
6x
RS Tightening ; M4x8
6x
651
6. Paper Output Options
Advertisement
Table of Contents
