Table of Contents
Advertisement
2. Select [Login] to log in as a system administrator.
Input of password :
A password input screen is displayed at the time of installation.
Entering "Fiery password" in the password field displays the setting screen.
NOTE:
On the Fiery Server Configuration page, look for ID in the BIOS Setup section. The alphanumeric
characters in the ID field is the default password.(Print the Configuration page: Press the Fiery logo,
then press [Info] > [Print Pages] > [Configuration].)
3. Select [Tools] > [Setup].
4. Check the settings of server, network, printer and PDL, and press [Save Changes] even if there is no change. At
that time, the setting will not be completed unless [Save Changes] is pressed.
312
4. Host Machine Options
Advertisement
Table of Contents
