Canon imagePRESS Lite C270 Installation Manual page 716

5. Install the Latch Receiver (Front) and Latch Receiver (Rear) on the left side of Multi Function Professional Puncher.
• 4 Screws (RS tightening; M4x10)
CAUTION:
Be sure to check the marks on the Latch Receivers to ensure correct installation.
• Latch Receiver (Front): F
• Latch Receiver (Rear): R
6. Install the Positioning Pin.
• 2 Screws (RS tightening; M4x10)
R
4x
RS tightening
M4 x10
2x
707
6. Paper Output Options
RS Tightening
M4X10
F