Table of Contents
Advertisement
6.
NOTE:
• This procedure applies to USA only.
• Affix the FAX Approval Label in the vacant space.
7.
Connect the power plug to the outlet.
8.
Turn ON the main power switch.
Checking the Operation
■ Type Setting
Select the country/region of the FAX Board in Service Mode: FAX > Type > TYPE
This setting performs the parameter settings to match the communication specification of the country/region.
1. From the following service mode, set the TYPE of country/region to install this machine, and then press OK.
FAX > TYPE > TYPE
2. Confirm that service mode parameter below is "0". In the case, parameter is "1", change to "0".
COPIER > OPTION > DSPLY-SW > SDTM-DSP
NOTE:
To change parameter to "0" makes no show below [Settings/Registration > Preferences > Time/Energy Settings > Auto Shutdown
Time] and auto shut down is not available.
3. Turn OFF/ON the main power switch to enable this setting.
270
4. Host Machine Options
Advertisement
Table of Contents
