Checking After Installation - Canon imagePRESS Lite C270 Installation Manual

Checking after Installation

■ Disposal Parts
1. Following disposal parts are remained after the installation procedure.
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
■ Paper Positioning Check /Adjustment Procedure
● Adjusting the Left Edge Margin(L1) of the Image
1. After setting the service modes (level 1) as follows, press the Start key and output a test print.
• COPIER > TEST > PG > TYPE = 5
• COPIER > TEST > PG > COLOR-M = 1
• COPIER > TEST > PG > COLOR-Y/C/K = 0
2. Print sheets of paper from POD Deck Lite and then check that L1 is 2.5+/-1.5mm.
3. Execute manua adjustment as follows when it is out of standard.
Screw (RS tightening; M4x8)
Screw (RS tightening; M4x10)
Screw (TP; M3x6)
Screw (P tightening; M3x8)
Paper Size Label (remaining label)
Blindfold Seal
Door Stopprt
Connector Cover
Feed Cover
Lower Right Cover
Removed Face Cover
L1
358
5. Paper Feed Options
3pcs.
2pcs.
2pcs.
1pc.
1pc.
1pc.
1pc.
1pc.
1pc.
1pc.
2pcs.