Canon imagePRESS Lite C270 Installation Manual page 802

3. Turn the adjustment dial of the caster in the direction of the arrow by lifting the dial upward a little to adjust the tilt.
NOTE:
Adjust the tilt at 2 left casters.
• To tilt the Finisher to the right, turn the dial in the direction of arrow [A].
• To tilt the Finisher to the left, turn the dial in the direction of arrow [B].
A full turn of the adjustment dial changes the height of the Finisher by approx. 2.0 mm.
[B]
[A]
[B]
793
6. Paper Output Options