Table of Contents
Advertisement
Installation Procedure
■ Making Preparations for Installing the Finisher
NOTE:
• When installing this machine after installing the finisher to the host machine, install this machine after releasing the finisher
from the host machine.
• The equipment is secured with packaging tapes and cushioning materials to protect it against vibration and shock during
transportation. Remove all packaging tapes and cushioning materials before installing the equipment.
1. Before installing this equipment, picku up the plastic tab and peel off the sponge from the saddle delivery block of
the finisher.
CAUTION:
Peel off the sponge together with the plastic sheet completely in such a manner that the double-stick tape does not remain
on the finisher surface. If you forget to peel off the sponge or the double-stick tape is remaining, the paper delivered to the
saddle delivery block may get stuck with the sponge or the tape, resulting in a stacking failure.
2. Open the front door of the finisher.
836
6. Paper Output Options
Advertisement
Table of Contents
