Relocating The Machine - Canon imagePRESS Lite C270 Installation Manual

31. Remove the Fixing Plate.
• 1 Screw (RS tightening; M4x8)
32. Remove the Synchronous Communication Cable.
• 1 Wire Saddle

Relocating the Machine

■ Procedure
NOTE:
When moving the machine using stairs including steps or transporting the machine to a different place using a truck, proceed the
steps described below.
1. Remove this equipment from the host machine. (For the separation work, refer to
Equipment " on page
1x
464.)
1x
473
5. Paper Feed Options
"Removing from the Connection