Canon imagePRESS Lite C270 Installation Manual page 28

5. Hold the handle on the left side of the host machine, lift the host machine, and remove the pad and the plastic bag.
CAUTION:
Be careful not to lift the host machine too high as the balance will be lost.
6. Take out the 2 Slope Plates stored on the right side of the pallet, and remove the 2 pins taped to the backside of the
Slope Plates.
7. After turning the 2 Slope Plates over and installing them as shown in the figure, align the pin holes on the pallet
with those on the Slope Plates and insert the 2 pins.
Handle
Pad
Pin
Slope
19
Plastic Bag
2. Host Machine