Table of Contents
Advertisement
2. Remove the screw and spacer from the base stay unit. Push the POD Deck Lite until it stops while holding the base
stay unit (the removed screw is used at step 3).
3. Fix the removed screw at step 2 to the original position.
NOTE:
The screw is used to fix the base stay unit when the POD Deck Lite is transported for relocation.
■ Connection with the Host Machine
1. Insert screwdrivers into the hole of the rear right side and then release the lever to open the compartment.
1x
1x
387
5. Paper Feed Options
Advertisement
Table of Contents
