Table of Contents
Advertisement
8.
NOTE:
PTT Cable or Telephone Cord to the modular jack on the Host machine, and connect the other end to the modular jack on the
wall.
9.
Connect the Power Plug to the outlet.
10.
Turn ON the main power switch.
Checking the Operation
■ Type Settings
Select the country/region of the FAX Board in Service Mode: FAX > Type > TYPE
This setting performs the parameter settings to match the communication specification of the country/region.
1. From the following service mode, set the TYPE of country/region to install this machine, and then press OK.
FAX > TYPE > TYPE
2. Confirm that service mode parameter below is "0". In the case, parameter is "1", change to "0".
COPIER > OPTION > DSPLY-SW > SDTM-DSP
NOTE:
To change parameter to "0" makes no show below [Settings/Registration > Preferences > Time/Energy Settings > Auto Shutdown
Time] and auto shut down is not available.
3. Turn OFF/ON the main power switch to enable this setting.
280
4. Host Machine Options
Advertisement
Table of Contents
