■ Connecting the Interface Cable
NOTE:
For connecting the Interface Cable, refre to the Finisher's Installation Procedure.
1. Connect the interface cable of this equipment to the finisher.
2. Install the wire saddle at the hole in the rear lower cover.
NOTE:
The Wire Saddle is used to stow the cable of the finisher.
■ Connecting the Intermediate Power Cable
NOTE:
Carry out these steps after connecting this equipment and the finisher.
CAUTION:
Make sure that the Intermediate Power Cable is fully connected to the outlet. Also, make sure to install the plug
cover. If the connection is not right, an accident causing the smoke or fire may occur.
1x
654
6. Paper Output Options