Table of Contents
Advertisement
Booklet Trimmer-G1
Pre-checks
■ Points to Note before Installation
The pictures and illustrations used may be different from the product in front of you, but the procedure is the same.
■ Points to Note When Moving This Equipment
CAUTION:
• When moving this equipment after having unpacked it, be careful by placing a plate, etc. on areas with steps to prevent
the casters from hitting those steps. If the casters hit a step, the casters or the base plate may be deformed.
• When unpacking and moving this equipment, be sure to do so by pushing it from the side to which paper is delivered.
Do not push it from the side to which the finisher is connected.
■ Selecting Installation Site
To confirm the space required for the maintenance operation, refer to the installation manual "Checking the installation space".
• Safety Precautions > Points to Note at Installation > Checking Installation Space
CAUTION:
For emergency shutdown, be sure to secure 1,000 mm or more space on the sides and rear of the host machine.
CAUTION:
Be sure to install the Finisher and the Booklet Trimmer on a level floor with no difference in height. Difference in height or
level will cause paper feed failure. If the floor is uneven or not level, this can cause sheet transport problems.
856
6. Paper Output Options
Advertisement
Table of Contents
