Table of Contents
Advertisement
6. Install the Escape Tray.
• 1 Screw (Tapping; M4x12)
NOTE:
• Place the rear support part [A] of the Escape Tray on the Support Plate.
• Put the Edge [B] of the Escape Tray under the Right Lower Cover of the host machine.
• When tightening the screw, turn the screw by pressing the Escape Tray to the host machine.
[B]
CAUTION:
Open the Right Lower Cover of the host machine after installation, check that the Escape Tray does not hit the Right Lower
Cover.
[A]
1x
448
5. Paper Feed Options
Advertisement
Table of Contents
