Table of Contents
Advertisement
8. Hold the handle on the left side of the host machine, align the casters with the center of each Slope Plate while
supporting its corners, and then bring the host machine down slowly.
CAUTION:
Be sure not to let the casters drop off the slope plates.
9. Remove tapes on the exterior surface of the host machine.
10. Open the DADF and remove the packing materials from the Reader Assembly. Remove the fixing member of the
DADF and Reader section by the next section "Installing the optical system".
11. Remove the packaging materials from the Document Pickup Tray.
12. Pull out the cassette 3.
13. Take out its contents and remove the tape and fixing members.
Handle
Handle
20
2. Host Machine
Advertisement
Table of Contents
