• To increase the height of the Finisher, turn the dial in the direction of arrow [A].
• To decrease the height of the Finisher, turn the dial in the direction of arrow [B].
A full turn of the adjustment dial changes the height of the Finisher by approx. 2.0 mm.
NOTE:
If the adjustment dial keeps lifting upward, lower the adjustment dial by releasing three claws. And be sure to insert the three pins
of the adjustment dial to the hole of the caster support plate.
[B]
Claw
Claw
786
6. Paper Output Options
[A]
[B]
Claw