3. Remove the screws from bottom left side of the Paper Deck Unit (the removed screws are used at procedure 4,
"Preparation of the Host Machine").
• 3 Screws
NOTE:
The fixing plate is removed at procedure 6, "Preparation of the Paper Deck Unit".
4. Remove the fixing plate from bottom right side of the compartment (the removed screw is used at procedure 4,
"Preparation of the Host Machine").
• 1 Screw
NOTE:
The fixing plate is removed at procedure 7, "Preparation of the Paper Deck Unit".
3x
1x
341
5. Paper Feed Options