Carrier Weathermaster 48P030-100 Controls, Start-Up, Operation, Service, And Troubleshooting page 281

INSTRUCTIONS
Fill in the table to indicate the unit design information (from submittal), required control configuration, or set point if these parameters
are to be configured as part of factory start-up. If left blank, the unit will be left at the default configuration and set points.
Unit Operating Configuration
ITEM
Control Type
Supply Fan Ctrl
Supply Fan Type
Supply Air CFM
Supply Fan ESP
Supply Fan rpm
SF Max Speed
SF Min Speed
SF Heat Min Speed
SAV Dehum
3rd Party Fan Ctrl
Duct Static Reset
Exhaust Fan Type
Exhaust Fan CFM
Exhaust Fan ESP
Exhaust Fan rpm
Dehum Control
SAT Reset
Economizer Ctrl
Econo Min Position
Econo Max Position
Econo Min SP.MN
Econo Min SP.MX
3rd Party Econo Ctrl
Field CO2 Sens
Remote Occ Switch
Fire/Smoke/Purge
Filter Status Switch
Demand Limit Ctrl
BACnet Comm
Occupancy Control
Operating Setpoints
ITEM
Occ Cooling SP
Unocc Cool SP
VAV Occ Cool On
VAV Occ Cool Off
Cool SAT SP
Low Cool SAT SP
High Cool SAT SP
Lo Cool On Dmnd
Hi Cool On Dmnd
Low Cool Off Dmnd
Econ OAT Lock Out
Diff DB RAT Offset
Dehum RH SP
Vent Dhm SAT SP
Cool Dhm SAT SP
SP Duct Static SP
PE On SP1
PE On SP2
Building Press SP
REQUIRED CONFIGURATION OR SET POINT
VAV RAT / TSTAT / SPT
Continuous / Auto
SAV / VAV / CV
% (SP.MX)
% (SP.MN)
% (HT.V.M)
No / Yes
No / Reset Ctrl / Override Ctrl
No / Yes
None / CV / Mod (BP)
Return Air RH / Dehum Input
No / Yes
DB / Enth / Diff DB / Diff Enth
% (EC.MN)
% (EC.MX)
% (EP.MS)
% (EP.XS)
No / Reset Ctrl / Override Ctrl
No / Yes
No / Yes
No / Yes
No / Yes
No / Yes
No / Yes
Schedule / BAS / Switch
REQUIRED CONFIGURATION OR SET POINT
°F (OCSP)
°F (UCSP)
°F (V.C.ON)
°F (V.C.OF)
°F (SASP)
°F (SA.LO)
°F (SA.HI)
°F (L.C.ON)
°F (H.C.ON)
°F (L.C.OF)
°F (OAT.L)
°F (DDB.C)
% (D.RH.S)
°F (D.V.HT)
°F (D.C.SP)
(SP.SP)
% Econo Pos (BP.P1)
% Econo Pos (BP.P2)
(BP.BP)
CL-3
VALUE
VALUE