Delivery System - Abbott i-STAT Alinity Operation Manual

222

Delivery System

The Delivery System item is created to document how oxygen is delivered. Various oxygen delivery
systems have settings or measurements that should be documented. The settings and/or measurements
are created as STATNote items. Items must be created and available in the Manage Items section before
building the Delivery System. See Table below for examples of delivery systems.
Example, the table below shows various delivery systems and the corresponding STATNotes items and
modes.
Table 3–3: Delivery System table
Delivery System
Vent
Room Air
BNC
VentiMask
CPAP
In the table above, BNC delivery system requires 3 STATNotes items. To check whether these STATNotes
items exist: Click Manage and Assemble Profiles > STATNotes > Manage Items
The screen displays all existing items. If all of the STATNotes items needed for delivery system BNC are
included in the list, this means that the delivery system item can be built. It is also important to note,
when checking the STATNotes list for an item, the item may exist under the "APOC" name. For example,
if you are searching the list for the Set Rate item, it may be listed as APOC set rate.
If any of the STATNotes items do not exist, create them.
When creating a Delivery System item, the following steps will be completed:
Item Name
i-STAT Alinity — System Operations Manual
Note: All STATNotes items must be available before a Delivery System item can be
created.
Required. Specify a name that is from 1 to 20 characters long and:
• does not begin with the characters APOC (in upper or lower
case)
• is a unique name within this healthcare organization.
STATNotes Items and Modes
Mode (custom-built mode)
None
LPM
FIO2
iNO
FIO2
FIO2
CPAP
LPM
Art: 746300-01 Rev. N
Rev. Date: 02-Nov-2022