Analyte Settings Category - Abbott i-STAT Alinity Operation Manual

*Analyte Settings Category

This section contains features to customize the analyte settings for the i‑STAT Alinity, such as units,
reference and action ranges. The Analyte Settings category can be created or modified with the following
steps.
Click Analyte Settings, then select APOCAnalyteSettings and click View. The screen displays the
default name APOCAnalyteSettings, and default values for each feature. Scan through the
APOCAnalyteSettings and determine if the selections work for the profile being assembled. If they
do then no additional work is needed in this category. The APOCAnalyteSettings category will be
available in the Manage Profiles section. Use it to assemble the new profile. If the
APOCAnalyteSettings do not work for the profile being assembled, click Finish to stop viewing.
Click Create and follow the instructions below.
You are prompted to specify a name for the settings and an optional description:
Analyte Settings
Name
Description
When finished, choose from the options shown at the bottom of the screen:
• Discard to undo changes
• Next to open the next tab
i-STAT Alinity — System Operations Manual
Note: All required categories have a default setting named with the APOC prefix. In
addition, the settings are populated with default values.
Required. Specify a name that is from 4 to 40 characters long and:
• consists only of the following characters:
￮ 0 through 9
￮ A through Z or alphabet appropriate for language (in upper or
￮ blank space
￮ underscore ( _ )
• does not begin with the characters APOC (in upper or lower
case)
• is a unique name within this healthcare organization
Optional. Provide any information that helps the user know how or
why the category was named or created.
lower case)
Art: 746300-01 Rev. N
179
Rev. Date: 02-Nov-2022