Abbott i-STAT Alinity Operation Manual page 54

16
Administrative Options: Operator Management
Administrative Options: Profile Management
i-STAT Alinity — System Operations Manual
Enable/Disable Training Mode
View Observation Checklist
Operator Event Log
Install Profile from USB
Install Profile from Server
Delete Profile
Profile Status
Art: 745527-01 Rev. N
Enabling allows for operator to enter
instrument training mode. Testing pathway
screens in training mode are the same as those
found in normal operation except for the
purple frame around each screen. Although
customization is not required for training
mode use, there are many additional functions
that can be added through customization.
This function requires creating a customization
profile that includes a facility specific list of
observable skills. Trainer may use the list to
observe a trainee complete listed skills
Reserved for future use.
Follow prompts on the screen to
install instrument software.
If the instrument does not detect
the Base Station, try the
following:
• remove the instrument and
re-seat it on the Base Station
• check to ensure that the Base
Station is getting power (blue
light illuminated)
If the instrument does not detect
the USB drive, try the following:
• remove the USB and reinsert
• make sure the USB is
formatted.
Reserved for future use.
Follow prompts on screen to
delete the customization profile
installed on instrument.
List of information regarding
customization profile loaded on
instrument.
Rev. Date: 13-Oct-2022