Calibration Verification Testing And I-Stat Tricontrols Calibration Verification Solutions - Abbott i-STAT Alinity Operation Manual

80
Calibration Verification testing and i-STAT TriControls
Calibration Verification Solutions
A five-level calibration verification set is available to verify the calibration of i‑STAT cartridges throughout
the reportable range.
i-STAT Calibration Verification (Cal Ver) Solutions
Sodium
Potassium
Chloride
Ionized Calcium
i-STAT TriControls Calibration Verification Solutions
Sodium
Potassium
Chloride
Ionized Calcium
pH
Each set contains four 1.7 mL glass ampules of each level.
Storage
Store refrigerated at 2 to 8°C (35 to 46°F) until the printed expiration date on the box and ampule labels.
Unopened ampules of i‑STAT Calibration Verification and i‑STAT TriControls Calibration Verification and
solutions can also be maintained at room temperature (18 to 30°C or 64 to 86°F ) for up to 5 days.
Do not use i‑STAT Calibration Verification and i‑STAT TriControls Calibration Verification solutions past
the labeled expiration date on the box and ampule labels.
Ampule use
Barcode on the ampule must be scanned before the ampule is opened.
i‑STAT Calibration Verification and i‑STAT TriControls Calibration Verification ampule testing must be
performed within 10 minutes of opening the ampule.
i‑STAT Calibration Verification and i‑STAT TriControls Calibration Verification ampule testing must be
performed immediately upon opening the ampule when testing pH, PCO
Ranges
Assigned ranges are provided in the form of value assignment sheets (VAS). These are located on
www.globalpointofcare.abbott/en/support/istat-brand/istat-alinity.html. Abbott Point of Care makes
i-STAT Alinity — System Operations Manual
PCO
2
PO
2
pH
PCO
2
PO
2
TCO
2
Hematocrit
Art: 745537-01 Rev. F
Glucose
Lactate
BUN/Urea
Creatinine
Glucose
Lactate
BUN/Urea
Creatinine
, PO , iCa.
2 2
Rev. Date: 02-Nov-2022
https://