Abbott i-STAT Alinity Operation Manual page 106

68
The printer does not print, and the
STATUS indicator is red.
When some print problems occur, a message prints that indicates the cause:
Printer Failure. Discard
printout. Use another
printer. Report failed
printer to System
Administrator.001
Printer Failure. Use another
printer. Report failed
printer to System
Administrator. 002
Printer Failure. Use another
printer. Report failed
printer to System
Administrator. 003
i-STAT Alinity — System Operations Manual
Printer Problem
Printout Text
Resolution
The print head is hot. Allow the print head to cool before
attempting to reprint.
System Administrator Action
Reset the failed printer:
1. Turn off the printer and unplug the power cord.
2. Open the battery compartment and unplug the battery.
3. Leave the battery unplugged for at least 10 seconds.
Then reconnect the battery and close the battery
compartment.
4. Reconnect the power cord. Then, press the power
button to turn the printer on. Attempt to print a record
from the instrument. If a printer failure occurs, contact
Technical Support.
Reset the failed printer:
1. Turn off the printer and unplug the power cord.
2. Open the battery compartment and unplug the battery.
3. Leave the battery unplugged for at least 10 seconds.
Then reconnect the battery and close the battery
compartment.
4. Reconnect the power cord. Then, press the power
button to turn the printer on. Attempt to print a record
from the instrument. If a printer failure occurs, contact
Technical Support.
Reset the failed printer:
1. Turn off the printer and unplug the power cord.
2. Open the battery compartment and unplug the battery.
3. Leave the battery unplugged for at least 10 seconds.
Then reconnect the battery and close the battery
compartment.
4. Reconnect the power cord. Then, press the power
button to turn the printer on. Attempt to print a record
from the instrument. If a printer failure occurs, contact
Technical Support.
Art: 745525-01 Rev. E Rev. Date: 04-Mar-2021