Aliniq Nci - Customization And Connectivity; Aliniq Nci - Determining Success Or Failure - Abbott i-STAT Alinity Operation Manual

AlinIQ NCi - Customization and Connectivity

After creating the NC (ancc) file, refer to the section in this document for AlinIQ Customization
Workspace for i‑STAT (AlinIQ CWi). Connectivity features in the CWi enable the instrument to transmit to
and receive information from remote systems.

AlinIQ NCi - Determining Success or Failure

After you have used NCi to configure connectivity, you can test the connection. Follow the steps shown
here:
• To check a wired network connection, place the i‑STAT Alinity instrument in the base station that is
connected to the facility's network and power on the instrument. On the instrument screen, in the
upper right corner, the ethernet symbol
• To check a wireless network connection, remove the i‑STAT Alinity instrument from the base station.
On the instrument screen, in the upper right corner, the wireless internet symbol displays. This
symbol
depending upon the signal strength in the location. A location that displays the symbol with all bars
empty represents no signal. If the symbol displays with all bars empty, move the instrument to a
location closer to the wireless access point.
i-STAT Alinity — System Operations Manual
represents a strong signal. Some or all of the bars in the signal should be filled in,
displays indicating an active connection.
Art: 747079-01 Rev. F
125
Rev. Date: 28-Apr-2020