Manage And Assemble Profiles - Abbott i-STAT Alinity Operation Manual

Customization of instruments is controlled by profiles built in the CWi. A profile is a set of categories. A
group of features makes up a category.
Building categories and assembling them into profiles allows each instrument to behave differently than
an instrument used 'out of the box'.
Instruction on building categories and profiles is discussed in this section.
The following screen is an example:
The commands shown on the upper right can be used to perform these actions:
Create
Create from Existing
Change
View
Delete
Export
Print
The Search field is used to find free-field text in the Workspace table.
The Filter option is used to limit what is displayed in the Workspace table. These functions are available
for all categories in the Manage and Assemble Profiles Workspace.
i-STAT Alinity — System Operations Manual

3.4 - Manage and Assemble Profiles

Create a profile or category.
Manage Profile and all Categories have a Create from Existing
capability. The purpose of this action is to allow a user the ability to
select and copy an existing Profile or Category so modifications can be
made easily. When using this action the user will be required to
rename the Profile or Category and then make the desired changes to
the features.
Manage Profile and all Categories can be changed without renaming.
Select a Profile or Category for viewing to determine the enabled
features.
Remove a Profile or Category from the Manage and Assemble Profile
Workspace. Assigned Profiles or Categories cannot be deleted.
Export a package file to a USB device or storage device.
Select a Profile or Category to print a hard copy.
Art: 746300-01 Rev. N
143
Rev. Date: 02-Nov-2022