Abbott i-STAT Alinity Operation Manual page 157

￮
subnets and networks in decimal dot notation. Example: 172.16.254.1
￮
‒ Automatic (DHCP) Obtain IP addresses and networking parameters automatically from
‒ Use the following IP address Select this check box if you need to specify the DNS
I want to set the Wi-Fi Frequency Bands manually.
Select this check box to configure the instrument to use either the 2.4 or 5 GHz frequency band
exclusively. When both values are selected, the instrument will automatically select which band
to use. Select one of the check boxes to limit the instrument to that band only:
2.4G
5G
Options for Enterprise Authentication Types
When Authentication Type selected is WPA Enterprise, WPA2 Enterprise, or WPA2/WPA Enterprise, the
options shown here are enabled:
EAP Method
Select one of the following:
TLS
TTLS/MSCHAPv2
PEAPv0/EAP-MSCHAPv2
Validate the Server Certificate
Select this check box to configure the instrument to validate the server certificate. Unselect the
check box if this is not required.
Server Name
Network name of the authentication server.
CA Certificate File
Name of the file that contains the Certificate Authority certificate.
Client Certificate File
Name of the file that contains the client certificate.
Client Key File
Name of the file that contains the client key.
i-STAT Alinity — System Operations Manual
Default Gateway IP address for routing device that passes traffic between different
DNS Server Address Mode Select either:
a DHCP server.
server address manually. Specify values for:
•
Preferred DNS IPv4 address of the server in decimal dot notation.
•
Alternate DNS IPv4 address of the server in decimal dot notation.
Art: 747079-01 Rev. F
119
Rev. Date: 28-Apr-2020